TSB SERIES THERMOSET BUILDER MODELS

TSB 3100T

The TSB 3100T  is the workhorse of Remco's Thermoset Builder Extruder/Applicators and is most often used by companies building small to medium and sometimes large rollers, pipe, or downhole packers. This model, combined with our SS150T, SS150THD, or SS250T spin stations, has a 50"/1270 mm maximum roll diameter.  The machine's length is customized using 30"/762 mm length increments and is limited only by the size of your building.  The extruder is Remco's R300RS cold feed unit with a 3"/76 mm diameter,12:1 L/D screw.  Output is approximately 6-10 lbs per minute (2.7-4.5 kg/min, depending on the polymer being processed).   All Remco Thermoset Builders can build up to a 1" wall thickness per pass.  Greater wall thicknesses can be achieved with multiple passes.

TSB 4100T

The TSB 4100T is a popular Thermoset Builder when Remco customers need more extruder output.  It is most often used by companies building larger diameter rollers, pipe, or downhole packers with greater wall thicknesses.  This model, combined with Remco's SS150T, SS150THD, or SS250T spin stations has a 50"/1270 mm maximum roll diameter capacity.   When combined with Remco's SS480T spin station it has an 80"/2032 mm diameter capacity.  The machine's length capacity is customized in 30" length increments and is limited only by the size of your building.  The extruder is a Remco R350RS cold feed type with a 3.5"/88.9 mm diameter screw at 12:1 L/D.  Its output is approximately 10-15 lbs per minute (4.5-6.8 kg/min), depending on the polymer being processed.  All Remco Thermoset Builders can build up to a 1" wall thickness per pass.  Greater wall thicknesses can be achieved with multiple passes.

back to the top

TSB5100T

The TSB 5100T is constructed around a 4.5" rubber extruder powered by a 100HP variable speed motor.  The expected output rate of this Remco extruder/applicator is between 15-25 lbs. per minute (6.8-11.3 kg/min) at a 50 RPM screw speed, with most compounds, which is up to two and a half times greater than our smaller TSB 3100T series.  The extruder is Remco's R450RS Cold Feed Extruder, 4.5"/114.3 mm diameter screw, with a 12:1 L/D.  With the TSB5100T extruder/applicator's output rate, a 6" diameter x 200" length roller can be covered with a 1.5" wall thickness of rubber in about sixteen minutes.  A 60" diameter x 200" length pipe can also be covered with 1/4" rubber in about the same time.  This machine has amazing versatility and speed if you are covering large rollers or pipe with up to 3" rubber wall thickness.  The Extruder/Applicator can be matched with the SS150HD, the SS250T, the SS480T and the SS580T.  All Remco Thermoset Builders can build up to a 1" wall thickness per pass.  Greater wall thicknesses can be achieved with multiple passes.

back to the top